waveform sweep measurement

[bartvsc]

I have a signal with a waveform amplitude of 5.0 to 7.0 V P/P. The waveform one cycle period is 0.25 ms nominal.

The signal duration is 42 ms (4.2 div. at 10 millisec per div). The signal repatitive rate is once every 4 seconds.

Is it possible to measure this in one stroke in one graph/chart ? How do I do that ?

[KvZ]

Hi bartvsc

you can do this by setting up a record that spans 4 second. This would make the record lenght is sample equal to 'Sample rate * 4

An other option is to acquire the data in chunks and appent these with the appent waveform or build array functions in LabVIEW before display

Hope this helps

Karsten