use of Advantech PCI card on LabVIEW

[mhs100]

Hi all

 I want to use Advantech PCI-1712 card on Labview,  the driver of this card is already installed. Does

anyone have some Example VIs and Application notes of how to use the Analog and Digital I/Os of this
card on labview? If yes ,Plz send.

Basically, i want to use the two Analog outputs of this card for generating two sine waves. One sine wave

has the fixed amplitude and frequency and the other sine wave should have the controls provided on the

front panel to control its amplitude and phase shift with respect to the other. If anyone has generated the two

waves from two analog outputs of this card then please give me the suggestions of how to do it.

Please send me any VI on this or any application note on this. I have already read the help , but still concept

is not clear.

Any help will be greatly appreciated.

Regards

[Justin_P]

Have you tried contacting Advantech?  They list "Rich examples speeding up your programming" as a feature.  You could ask them for those.

[mhs100]

No, i didnt find there anything relevant to my application.

[smercurio_fc]

I believe the LabVIEW drivers for that card are actually here. I believe the bottom one is the one you want.

How I found these:

1. From the PCI-1712 page I clicked on the Manual/ Driver/ BIOS/ FAQ link.
2. Then, I clicked on the Advantech's Drivers for 3rd Party Software link.

[mhs100]

i have already viewed them but how to output dual waveforms from two analog o/p channels....

Any ideas or example

[mhs100]

.....

[Dennis_Knutson]

What have you tried? A brief look at the help that comes with the driver shows a function called AO Generate Waveforms. Looks like it will do exactly what you want.