thread consumption error

[uma0732]

hello everyone,

iam getting warning :" connection to the cRIO have been lost"

when i checked in the error log,

these messages where displayed.

l will attach the VI ,please help with resolving the error.

####
#Date: Mon, Jul 03, 2017 04:47:46 PM
#OSName: Linux
#OSVers: 4.1.15-rt17-4.0.0f0
#OSBuild: 262415
#AppName: lvrt
#Version: 16.0
#AppKind: AppLib
#AppModDate:

InitExecSystem() call to GetCurrProcessNumProcessors() reports: 2 processors
InitExecSystem() call to GetNumProcessors() reports: 2 processors
InitExecSystem() will use: 2 processors
starting LV_ESys2_Thr0 , capacity: 24 at [3581926750.99877501, (17:09:10.998775000 2017:07:03)]
starting LV_ESys2_Thr1 , capacity: 24 at [3581926750.99877501, (17:09:10.998775000 2017:07:03)]
starting LV_ESys2_Thr2 , capacity: 24 at [3581926750.99877501, (17:09:10.998775000 2017:07:03)]
starting LV_ESys2_Thr3 , capacity: 24 at [3581926750.99877501, (17:09:10.998775000 2017:07:03)]

[tyk007]

There is nothing unusual in that event log you appended to your post. So I suggest the problem lies elsewhere.

[uma0732]

Dear sir,

thanks for your reply. will you suggest me whether the problem lies in hardware or software?

when the calibration VI is run after few seconds it gets automatically disconnected and shows warning " connection to the target have been lost"