04-08-2014 02:01 PM
hello.
i am new to fpga spartan-3.i am trying to operate my robot for some task with fpga..i need to interface 10-bit ADC ic with fpga.can anyone please help me in this regard.?.VERILOG code will be the best help.
04-08-2014 02:42 PM
What is the NI hardware you are using, not just the FPGA version.
What version of LabVIEW are you using?
Do you have the FPGA toolkit and have it installed?
What have you tried? Post what you have tried.
Have you looked at any of the shipped examples? (go to Help >> Find Examples)
And if you are a real beginner here are some free help not related to FPGA but LabVIEW in general. The tools you use for FPGA development are roughly the same as normal Windows/Mac/Linux development.
3 Hour Introduction http://www.ni.com/white-paper/5243/en/
6 Hour Introduction http://www.ni.com/white-paper/5241/en/
LabVEW Basics http://www.ni.com/gettingstarted/labviewbasics/
Self Paced training for students http://www.ni.com/academic/students/learn/
Self Paced training beginner to advanced, SSP Required http://sine.ni.com/myni/self-paced-training/app/main.xhtml
LabVIEW Wiki on Training http://labviewwiki.org/LabVIEW_tutorial#External_Links
Unofficial Forum Rules and Guidelines
Get going with G! - LabVIEW Wiki.
16 Part Blog on Automotive CAN bus. - Hooovahh - LabVIEW Overlord
04-08-2014 04:27 PM
"VERILOG code will be the best help."
Probably best to go to a site dedicated to VERILOG then, no? In any case, you're more likely to get help if you show that you've put some effort in yourself beforehand.