Hello, i have finally a connection to my device with SSH protocol , using the LIBSSH2 addon from VIPM. it works but my problem is that it takes 500 ms each time i ask for a value. and so 3 seconds to get the answer for the table. if you have any suggestion for me to try to get this as a normal speed , that would be really great and helpful it is LIBSSH2 1.2.4 ; Labview 2021-32bits, windows 10 64bits

LabVIEW

SSH LIBSSH2 Labview 2021 SLOW

Interesting. I tried the .NET 4.6.2 version of the 2024.0 and 2023.0 versions of the dll. LabVIEW is refusing to read the contents of the dll when higher than 2023.0 when trying to configure a .NET control or constant. Choosing a property or method does not appear to have any issues using the drop-down of the property node with a wired up .NET reference. So it would probably be best to keep the 2023.0 version for now just to be on the safe side. Just close the project, replace the dll, load the project back up, ignore all of the warnings saying the .NET methods were loaded from a different location, and save all.

By default, I set the read timeout to 1 second. Is that long enough for your command to execute and respond? I don't think there is any indication given if the read times out.

There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5