NI-DAQ 6.7 problem

[ChrisM 24]

Has anyone experienced problems when installing NI-DAQ 6.7 on Windows 2000?
When installing, the installer runs though all the questions, and just as it
is about to start copying files from the CD I get a code error come up in a
dialogue box.

Anyone seen this and know how to fix it?

Yours sincerely, Chris McCrory Project Engineer
______________________________________________ SP Technology Limited E-mail:
c.mccrory@sp-tech.com Website: www.sp-tech.com Tel: +44 (0) 1382-880088 Fax:
+44 (0) 1382-880099 The information in this e-mail is confidential and for
use by the addressee(s) only. If you are not the intended recipient or
responsible for delivery of the message to the intended recipient, please
notify us immediately on +44 (0) 1382 8
80088 and delete the message from
your computer; you may not copy or forward it, or use or disclose its
contents to any other person. As Internet communications are capable of data
corruption, SP Technology Ltd do not accept any responsibility for changes
made to this message after it was sent. For this reason it may be
inappropriate to rely on advice contained in an e-mail without obtaining
written confirmation of it. Please note that SP Technology Ltd does not
accept the liability or responsibility for viruses and it is your
responsibility to scan attachments, if any. Opinions and views expressed in
this e-mail are those of the sender and may not reflect the opinions of SP
Technology Ltd.

[Christopher Quijano]

I had this problem also. Make sure you have administrative privileges. My
problem was that one of the system directories that LV needed to write too
did not have an owner and did not have any permissions associated with it.

Christopher Quijano


Chris McCrory wrote in message
news:8oitvr$9s4$1@uranium.btinternet.com...
> Has anyone experienced problems when installing NI-DAQ 6.7 on Windows
2000?
> When installing, the installer runs though all the questions, and just as
it
> is about to start copying files from the CD I get a code error come up in
a
> dialogue box.
>
> Anyone seen this and know how to fix it?
>
> Yours sincerely, Chris McCrory Project Engineer
> ______________________________________________ SP Technology Limited
E-m
ail:
> c.mccrory@sp-tech.com Website: www.sp-tech.com Tel: +44 (0) 1382-880088
Fax:
> +44 (0) 1382-880099 The information in this e-mail is confidential and for
> use by the addressee(s) only. If you are not the intended recipient or
> responsible for delivery of the message to the intended recipient, please
> notify us immediately on +44 (0) 1382 880088 and delete the message from
> your computer; you may not copy or forward it, or use or disclose its
> contents to any other person. As Internet communications are capable of
data
> corruption, SP Technology Ltd do not accept any responsibility for changes
> made to this message after it was sent. For this reason it may be
> inappropriate to rely on advice contained in an e-mail without obtaining
> written confirmation of it. Please note that SP Technology Ltd does not
> accept the liability or responsibility for viruses and it is your
> responsibility to scan attachments, if any. Opinions and views expressed
in
> this e-mail are those
of the sender and may not reflect the opinions of SP
> Technology Ltd.
>
>