Lock-In Amplifier Start-Up Kit reports "license expired". How to renew it?

[AKR1]

Lock-In Amplifier Start-Up Kit reports "license expired on 08/01/2003". How to renew the license?

[raeletro]

Go to the block diagram, on the first frame, there is a vi that checks for the expiration date. Just delete it and run. I did it yesteday and it worked.

[Claudia]

Hello,

Another person was also asking for a Lock-In Amplifier Start-Up kit that would not expire, and I published it in the following Discussion Forum:
"Do you have a lock-in toolkit"


Hope this helps,

Claudia Lorente
Applications Engineer
National Instruments
http://www.ni.com/ask

[urs boegli]

Claudia,
thanks for the version mentioned.
I would like to change the lock-In to one with a reference signal
instaed of PLL, and a few other changes.
I tried to understand how your sample works , but as soon as I'm
reaching the VI's on a deeper level I'm running into code protection.
Why are these VIs not public?

Thanks
Urs


Claudia schrieb:

>Hello,
>
>Another person was also asking for a Lock-In Amplifier Start-Up kit
>that would not expire, and I published it in the following Discussion
>Forum:
>
>href="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000...


>
>Hope this helps,
>
>Claudia Lorente
>Applications Engineer
>N
ational Instruments
>http://www.ni.com/ask
>
>