Hi everyone,LINX can be installed on the Raspberry Pi 4. The LINX 3.0 Target Manual Install Process (https://www.labviewmakerhub.com/doku.php?id=learn:libraries:linx:misc:target-manual-install) did not work due to changes in the latest version of Raspbian. Here is the procedure that I used to install LINX. The procedure also works on the Raspberry Pi 2B, Pi 3A+, Pi 3B and Pi 3B+ running Raspbian Buster. 1. Setup the Raspberry Pi using a new installation of Raspbian Buster. 2. Change the default password for the Pi account on the Raspberry Pi.3. Setup a WiFi or Ethernet connection from the Raspberry Pi to your router.4. Enable SSH on the Raspberry Pi.5. SSH into the Raspberry Pi or open a terminal window on the Raspberry Pi desktop.6. Check that the Raspberry Pi can access the Internet by entering the command ping -c 4 raspberrypi.org 7. Enter the commands shown in the code block below. Note: The text may wrap due to the web browser window size. I recommend copying the text into a text editor to see the original formatting. # Enable i2c and spi sudo raspi-config nonint do_i2c 0 sudo raspi-config nonint do_spi 0 # Update Raspbian sudo apt-get update sudo apt-get dist-upgrade -y # Add the LINX repository sudo sh -c 'echo "deb [trusted=yes] http://feeds.labviewmakerhub.com/debian/ binary/" >> /etc/apt/sources.list' sudo apt-get update# Install the LINX package. Error messages will be displayed for the# nisysserver.service and labview.service sudo apt-get install -y lvrt-schroot # Move the nisysserver.service and labview.service files to the systemctl folder sudo mv /etc/systemd/system/multi-user.target.wants/nisysserver.service /lib/systemd/system sudo mv /etc/systemd/system/multi-user.target.wants/labview.service /lib/systemd/system # link liblinxdevice.so to the Raspberry PI device driver file liblinxdevice_rpi2.so sudo schroot -c labview -d /usr/lib -- ln -s liblinxdevice_rpi2.so liblinxdevice.so # Enable the nisysserver.service and labview.service to start on boot sudo systemctl enable nisysserver.service sudo systemctl enable labview.service # Start the nisysserver.service and labview.service sudo systemctl start nisysserver.service sudo systemctl start labview.service You should now be able to connect to the Raspberry Pi from the LabVIEW Project Explorer. Cheers,Andy.

LINX 3.0 on the Raspberry Pi 2, 3 and 4 running Raspbian Buster

Thank you, I followed all these threads but still cannot connect Pi4 4 Gb to LINX in Labview 2018.

Unable to connect to the target.

VNC, RDP and putty working correctly on that IP address.

第 31 條訊息（共 33 條）

926 檢視

Hola esto se debe almenos en mi caso por que la version raspi no puede conectarse al repositorio se soluciona agregando la parte de [trusted==yes]

第 32 條訊息（共 33 條）

394 檢視

I can install the software from Makerhub, add the Raspberry disposition to my project and connect, all good until trying to run the simulation, do you know why?

第 33 條訊息（共 33 條）

371 檢視

LabVIEW

LINX 3.0 on the Raspberry Pi 2, 3 and 4 running Raspbian Buster

Re: LINX 3.0 on the Raspberry Pi 2, 3 and 4 running Raspbian Buster

Re: LINX 3.0 on the Raspberry Pi 2, 3 and 4 running Raspbian Buster

Re: LINX 3.0 on the Raspberry Pi 2, 3 and 4 running Raspbian Buster