I have the error: "failure: datasupp.c line 531" with LabView 5.1.1. Why?

[srieng]

I have the error: "failure: datasupp.c line 531" with LabView 5.1.1. Why?
I use WIN 2000.

[Mark A. Hanning-Lee]

srieng wrote:
>
> I have the error: "failure: datasupp.c line 531" with LabView 5.1.1.
> Why?
> I use WIN 2000.

In general, www.ni.com/failure gives information about these internal
LabVIEW errors. Check your error there.

Mark

[srieng]

I've visited first the link www.ni.com/failure, but it didn't help me.

[srieng]

I need more help; www.ni.com/failure cannot help me.

[Brian_Vibert]

If no one in this group has experience with this problem and you went to www.ni.com/failure and the failure wasn't listed you need to contact NI's tech support directly. They are best suited to handle problems like this. Try this link to get started.

[nestor-sg]

Srieng,

The datasupp.c failure can be caused by several reasons, we will need a detailed description of the operation you were making before this error happened, what is inside the VI that gave you this error, has this VI worked before, etc. Please contact us with this information, you can find the steps to email us at www.ni.com/ask , please do so and we'll review the details you send to us to determine the causes and probable workaround. Thanks!...

Nestor Sanchez
Applications Engineer
National Instruments