Hi all
I am working with 2 PCIe card (#6351 and #6536) connected via RTSI. The bus RTSI permit to solve 2 critical problems in my application: simultaneous triggering and synchronization
For the synchronization, I would like to generate a rectangular signal with a fixed low level (5 microseconds) and a high level that I can tune with the card 6351 on the RTSI line 0
For the simultaneous triggering, RTSI line 1 is at 0 (low level) by default. The acquisition and the emission of the synchronization signal is triggered on a rising edge.
Here is the chronogram of the signals RTSI lines 0 and 1:
a) acquisition starts
b) 5 microseconds
c) measuring something
d) refreshing all the digital outputs
e) end
Could you help me with the vi because I really do not know how to proceed
Thanks by advance