11-23-2010 07:50 AM
Hi,
I'm planning to use 2 Wago 750-650 modules (serial to ethernet converter) attached to either a Wago 750-341 or 841 ethernet controller to communicate with a vacuum controller which uses a serial interface.
I wonder if anyone has accomplished this? I have written a small VI using MODBUS commands to try and achieve this but I am unsure how to input commands of longer than 3 bytes and it seems that it is not working yet.
Any tips or help would be welcomed.
Thanks
Keith.
11-26-2010 03:10 AM
Hello Keith,
Does this KnowledgeBase (http://zone.ni.com/devzone/cda/tut/p/id/3141) help you further?
11-26-2010 03:10 AM - edited 11-26-2010 03:10 AM
Hello Keith,
Does this KnowledgeBase (http://zone.ni.com/devzone/cda/tut/p/id/3141 ) help you further?
11-29-2010 02:24 AM
Thanks for the link but when I try it it does not seem to work. I'll try going manually to the link via the forums.
Thanks
11-29-2010 04:14 AM
Hello Keith,
Apparently the brackets were accidentally included in the link. Here's the right one:
http://zone.ni.com/devzone/cda/tut/p/id/3141