We are currently using LabVIEW 7.1/8.0 and NI MID-7604/7602 stepper driver
tooperate an infusion pump stepper motor for our biomedical engineering
senior design project. We hopefully want to burn the entire program that I have
attached onto a blackfin chip (we have the ADSP-BF537 EZ-Kit Lite). We also
need to display the front panels of the state functions on an colored LCD
display via yellow composite video cable (if possible), in addition to
digital I/O from buttons and a joystick to operate the "OK", "BACK", "HOME" buttons
and "UP", "DOWN", respectively in our LabVIEW program. Any help would be great,
any other hardware that may be needed would be greatly appreciated. NOT TO
FORGET: this has to be done through a blackfin microprocessor or ADSP-BF537 EZ-Kit
Lite, if possible. Our senior design project is an Accessible Infusion Pump
User-Interface. Thank You!
NI Software : LabVIEW version 7.1, 8.0
NI Hardware : Other device
Driver Version :
OS : Windows XP
