AT commands and GPRS connection

[zal_sciska]

Hi,

I would like to establish new GPRS connection to have consant access to the internet database. I use Siemens MC35 GSM/GPRS terminal.

I have tried to create GPRS connection using AT commands of MC35:

                 AT+CGDCONT=1,"IP","internet"
ATDT*99***1#

[Philip_Courtois]

Please refer to this thread!

[Napoleon Dynamite]

That's a smashing thread.  I used a lot of threads like that to make my kilt and knickers.  Alright, I'm going to go play a wee bit of me bagpipes.  See you on the Ol' Course some time...

Message Edited by Napoleon Dynamite on 07-26-2005 05:00 PM

[mikeporter]

As I explained before the last time you asked this exact same question, you are connecting to the device fine. The problem is that you don't know what to say after you're connected. You need to be able to interact with the device using the communications protocol that it is expecting.

Mike...

[alysko]

Please re-refer to this thread. I have put some explanations there.