IEEE1394-CAM (Imaging Source DFK 41BF02), "Error 0xBFF69018"

[mueller.gerhard@heidenhain.de]

Hello,

I get the above mentioned error when I try to get a grab or snap in the measurement explorer.

In the device manager the IEEE1394-card is correclty installed as well as the IEE1394-cam.

In the measurement explorer the "NI-IMAX-..."-Driver ist used, not the "Standard 1394-Desktop camera"

Where´s the error?

With kind regards,

gerhard

[Topper_Harley]

Hi Gerhard,

please have a look at this document:

Troubleshooting FireWire (IEEE 1394) Camera Installation Problems

http://digital.ni.com/public.nsf/allkb/C2F87C32F5627A0A862569E5006C17C4?OpenDocument

-Topper

[mueller.gerhard@heidenhain.de]

Hi Topper,

thanks for the fast answer.

Yesterday I´ve found out that this cam only has a 100Mbps connection to my card but this shoult be 400 Mbps.

The Card was identified in the device manager, the cam was identified in the max. Only grab/snap was not possible "insufficent transfer engine resources" - means the bus connection is to slow (I think - whyever).

Due to this fact I reduced the Video Mode from Color 7,5fps to Mono and 3,75 fps and now I get a picture and it works.

Gerhard