Getting the measured multiple values from multiple channels of Agilent DSO-X 2014A 4-ch oscilloscope

[SeanAhn]

           Hi, all

I'm Sean Ahn, using LabVIEW 2013 sp1 with Agilent DSO-X 2014A  4-ch oscilloscope.

As attached vi file, I’m trying to get the measured multiple values from multiple channels of Agilent DSO-X 2014A  4-ch oscilloscope. But every time I try ‘Read Measurement : Statics’ I get the error message ‘hardware missing’ from oscilloscope, while ‘Read Measurement : Continues’ setting gives no problem working very well (but, it gives only one measured value-the last one in the list.).

 

In the user’s guide from Agilent, the error message is described as below.

-241, Hardware missing

This message can occur when a feature is unavailable or unlicensed.For example, some serial bus decode commands are only available when the serial decode options are licensed.

I already tried both USB and ethernet connection between PC and oscilloscope to get the same result. 😞

How can I solve this problem? Or is there any other way to get multiple values from multiple channels using ‘Read Measurement : Continues’?

Thanks in advance

Sean Ahn

[crossrulz · Accepted solution]

That error is telling you that you need to purchase an option to get that functionality.

[nyc_(is_out_of_here) · Accepted solution]

This message can occur when a feature is unavailable or unlicensed.For example, some serial bus decode commands are only available when the serial decode options are licensed.

The word unlicensed should have been a clue.