Description
Description-Separate-1This project contains VI for controlling the UTG962 / UTG932 generators. Despite that they are very cheap (~100$) they offer two channels 60MHz sine wave, have proper LCD screen, decent display menus.
| Model |
UTG932---30MHz |
UTG962----60MHz |
| Channel |
2 |
| Max frequency |
30MHz |
60MHz |
| Sampling rate |
200MS/s |
| Vertical resolution |
14 bits |
| Waveforms |
Sine, square, pulse, ramp, noise, DC, arbitrary |
| Sweep modes |
Logarithmic, linear |
| Frequency Characteristics |
| Sine |
1μHz~30MHz |
1μHz~60MHz |
| Square |
1μHz~15MHz |
1μHz~20MHz |
| Ramp |
1μHz~400kHz |
1μHz~400kHz |
| Pulse |
1μHz~15MHz |
1μHz~20MHz |
| Arbitrary |
1μHz~10MHz |
1μHz~10MHz |
https://www.banggood.com/UNI-T-UTG932-UTG962-Function-Arbitrary-Waveform-Generator-Signal-Source-Dua...
The project demonstrates how to control all parameters of the UTG962 generator through LabView.
Description-Separate-2How to Use
How-Separate-1Use the LLB library - run the main VI to see how to control the UTG962 remotely.
Before connecting the generator to the PC - download the software from UNI-T site and install the USB drivers
https://www.uni-trend.com/html/product/NewProducts/UTG900E%20Series/UTG962E.html
How-Separate-2
