Para descargar el software de NI, incluyendo los productos que se muestran a continuación, visite ni.com/downloads.
Overview
This VI is an example of how the ni-rt.ini file can be modified on a Real-Time controller programmatically from a host PC.
Description
The VI should be run from a host PC; it uses WebDAV to copy the controller's ni-rt.ini file to a specified location on the host, edits the StartAppAtBoot token, and then uses WebDAV to replace the ni-rt.ini file on the controller with the new settings. This VI is designed to work with a Linux RT controller such as the myRIO or cRIO-9068, to use it with a VxWorks target, you will need to change the path to the ni-rt.ini file.
Requirements
Software
LabVIEW 2013 (or compatible)
LabVIEW System Configuration API
LabVIEW Real-time module
Hardware
A Linux RT Target (other targets possible but changes will need to be made.)
Steps to Implement or Execute Code
Additional Information or Reference
DisableStartupApp 2013 NIVerified Block Diagram
After pressing "StartupApp?" ni-rt.ini file.
If not press "StartupApp?" ni-rt.ini file.
**This document has been updated to meet the current required format for the NI Code Exchange.**
El código de ejemplo del Intercambio de Código en la Comunidad de NI está autorizado con la licencia MIT.
Looks really usefull. Good job!