How to trigger ITC-16 pulse generation by external power source pulse using Labview VI

[alexey-bondar]

Hi,

We're running ITC-16 (Instrutech) and have Labview VI's for it.
We need to trigger the generation of pulses by ITC-16 by sending the pulse to it from external power source.
There are three setups in Labview VI's for ITC-16 that we have: for pulse generation, pulse acquisition and for both procedures simultaneously. We need to add triggering option to it somehow.

thank you in advance

sincerely,
Alexey Bondar

[Dennis_Knutson]

You've posted the same question multiple times and to multiple boards. Likely, you haven't gotten a response because no one is familiar with the ITC-16. I found a web site for this and apparently is a pci data acquisition board. A brief look at the specs at http://www.instrutech.com/html%5Citc16lit.html, does not list an external trigger option for either analog in or analog out. It only lists a trigger option for digital input. You really need to contact the vendor of this board to see if there are any other trigger options. It is their board and their software

[alexey-bondar]

thank you!
I will try to contact manufacturer. But it seems to me that their company doesn't exist any more or it became the property of HEKA.

I'm very sorry for posting the question in different topics.

Alex

[Dennis_Knutson]

Their web site seems to be current - http://www.instrutech.com/index.cfm. It mentions Heka as one of their dealers.

[alexey-bondar]

You can visit http://www.heka.com/ if you are interested to know InstuTECH destiny.

Alexey


Message Edited by alexey-bondar on 11-30-2007 12:36 AM