Error -307737 : VeriStand target(s) does not have data sharing support

[Engin33r]

Hi everyone,

Our service is pretty new to the VeriStand environment and me also. We are trying to make the transition from LabVIEW to VeriStand 2019 R3 but we are facing a main issue while trying to use the Stimulus Profile Editor, I would appreciate some help from you ! 🙂

The issue is happening when we add a cRIO (cRIO-9054) AI or CAN channel reference (either from DAQ Chassis/ either from Scan Engine/Ethercat add-on) in a Real Time Sequence, this same sequence is called within a Stimulus Profile, and then  the error -307737 occur, whereas we can read and write these channels in the VeriStand UI screen...

I was actually thinking that Ethercat would resolve this issue, but it did not.

I saw about reflective internet, but it looks like an older solution, reflective memory devices that may also be a solution.

Thanks for your advices, I can give you further information if needed.

[Engin33r]

Hello, up please

[Deus_ex_Machina]

This error occurs when deploying a real-time sequence that uses channels or aliases associated with another target. To solve this issue use a Real-Time Sequence Group Step and a Real-Time Sequence for each Target.

https://zone.ni.com/reference/en-XX/help/372846L-01/veristand/rts_group_step/