Switch Hardware and Software

Showing results for 
Search instead for 
Did you mean: 

internal Error while importing Configuration into Switch Executive NISE 3.0



we are having massive problems when importing new configurations into NISE 3.0 , the problem and some thoughts about the issue have already been posted here http://forums.ni.com/ni/board/message?board.id=320&thread.id=1704&view=by_date_ascending&page=1


However I do need updates/information about the problem, in short:

it is not possible to import large (approx 12000lines of trained routes) into NISE 3.0 to be able to achieve switching times within the 10ms range, using a complex overall configuration of 12 cascaded matrices  , NISE crashes with an "internal error" after approx. 10minutes. 


Any Information about the problem would be greatly appreciated.



thank you in advance,


0 Kudos
Message 1 of 2

Hey Michael,


I've posted a reply in the original thread.  Let's stick to that thread.  Thanks!

-John Sullivan
Problem Solver
0 Kudos
Message 2 of 2