Power Electronics Development Center

cancel
Showing results for 
Search instead for 
Did you mean: 

New 100kW AgileStack Power Stack Evaluation Kit features the NI General Purpose Inverter Controller

Evaluation Kit Description

The AgileStackTM is the industry’s first, and only, fully configurable power conversion module that features AgileStack CommunicationsTM technology to control, protect and monitor over 40 points of operating and fault conditions and Stack BlackBoxTM technology to store on-board fault data in the event of catastrophic failure.


The AgileStack Evaluation Kit allows out of the box evaluation of the AgileStack, National Instruments General Purpose Inverter Controller (GPIC) and SBE Power Ring Film Capacitors and includes:


(1) AgileStack (AgileSwitch Gate Drive/Interface Boards, EconoDual IGBT Modules, Current Sensors, High Performance Extruded Heat Sink)

(1) National Instruments (NI) Single-Board RIO GPIC Evaluation Kit (NI sbRIO-9606 with NI 9683 GPIC Mezzanine Card, AgileStack Evaluation Demonstration Software, 45-day LabVIEW Embedded Platform Evaluation Software)

(1) GPIC to AgileStack Interface Board and cables

(1) SBE Power Ring Film Capacitor Bank

The NI Single-Board RIO GPIC Evaluation Kit Features:

  • Fully instrumented turnkey control demonstration software with network user interface, live scope display, and configurable control settings.
  • 10 kHz waveform graphing and data logging with live status display and automatic fault capture (up to 116 kS/s)
  • Support for external isolated phase voltage and grid voltage sensors with configurable sensor gain, offsets and filtering
  • Datalog and fault log viewing and analysis with Microsoft Excel, The MathWorks, Inc. MATLAB®, NI DIAdem, and NI LabVIEW (including 3-phase power quality analysis)
  • Open source reference design software with 45-day evaluation of complete NI LabVIEW power converter design toolchain
  • Specs: ftp://ftp.ni.com/evaluation/powerdev/GPIC.pdf

SBE Power Ring Film Capacitor™ Features:

  • Extremely low internal losses (ESR) and low equivalent series inductance (ESL)
  • Industry-leading ESR/ESL characteristics
  • Extreme current pulse survival
  • Highest possible ripple current rating per micro-Farad
  • Inverter topology design for optimized current rating and reduced coolant need
  • High temperature polypropylene film capacitor designs
  • Specs: http://www.sbelectronics.com/products/integrated-modules-test-kits/

AEK.jpg

Where to obtain the AgileStack Evaluation Kit:

North and South America:     NAC Semi:     powerFAE@nacsemi.com    Phone: 1-866-651-2901 x26

Rest of World:                      AgileSwitch:   info@AgileSwitch.com         Phone: 1-484-483-3256

Message 1 of 1
(5,404 Views)