From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

PXI

cancel
Showing results for 
Search instead for 
Did you mean: 

Identifying chassis and embedded controller in MAX. Modules identified but chassis and controller are not.

Hello,

 

I am trying to configure the following in MAX.  

PXIe-1082 Chassis

Slot 1 - PXIe-8880 Embedded Controller

Slot 2 - PXIe-4309

Slot 3 - PXIe-4464

.

This is my first time using an embedded controller.  My expectation was to see it like any other chassis I've used. I'd see the chassis, expand to see the controller, expand again to see the modules.  

 

What's happening is my trigger is not being recognized (error 89125) and I suspect maybe the MAX configuration is not correct. The error states "No registered trigger lines could be found between the devices in the route. If you have a PXI chassis, identify it correctly in MAX" ect ect. Any help would be appreciated!

 

I have attached a screen shot of my MAX config.

 

Thanks!!!!

 

0 Kudos
Message 1 of 4
(719 Views)

NI MAX list of devices is indeed not the way it would typically look like.

 

Edit: This article answers exactly your issue - https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000fzLMSAY&l=en-US

 

Please also try resetting MAX database.

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000P8awSAC&l=en-US

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 2 of 4
(709 Views)

Thanks for the suggestion.  I went through that process and MAX looks exactly the same.  I also get the same error regarding the trigger.

0 Kudos
Message 3 of 4
(701 Views)

Let us keep both topics separate, you already have posted about DAQmx triggering at https://forums.ni.com/t5/LabVIEW/Daqmx-triggering-issue/m-p/4250754

 

Please continue this topic only to fix the listing of PXI chassis and controller in NI MAX and continue discussing any trigger-related errors in the other topic.

 

Edit: If you don't want to fix the NI MAX listing of PXI Chassis and controller, you can close this topic and continue the trigger errors in the other post.

 

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 4 of 4
(680 Views)