Error -63150 occurred at niLvFpga_Open_PXIe-7820R.vi:6390001

[KiranKeshavegowda]

Hello !!

I have a PXIe-1082 Chassis with two FPGA Card 7851R and 7820R. i have connected the  PXI system to a PC via MXI. When i try to load the FPGA bit file to 7820R i get the above error which is stated in the subject.  but i am load the FPGA model which was built for 7851R card successfully. 

i have not connected any of the DIO lines. its a brand new card and i was just checking if the FPGA Code/Models can be successfully loaded. is it software error (related to any of the drivers) or HW issue.. i have the second setup with same chassis and same Card and i see the same issue in that Chassis also.. Any help to resolve this problem is highly appreciated.

i am using Labview 2020 32 bit version of the software.

regards

Kiran

[Terry_ALE]

Are you running a shipping example?  How are you loading a bitfile?

[KiranKeshavegowda]

Hello Terry..

what do you mean by shipping example.. i am loading the bit file using the labview VI (Open FPGA VI ).

even i tried using veristand (FPGA Addon Custom device) and tried deploying. i get error in Veristand also.

Refer the attached images..

thanks

[Terry_ALE]

see https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YIKbCAO&l=en-US

Can you open an example project and VI for this hardware and try running it?

[KiranKeshavegowda]

Thanks for sharing the link. i get the same error with the shipping example also.

refer attached image

[Terry_ALE]

---

@KiranKeshavegowda wrote:

Thanks for sharing the link. i get the same error with the shipping example also.

refer attached image

---

the examples are tested and are supposed to work, they are best starting place and sanity check

your problem is likely hardware or drivers and not a LabVIEW/software issue

[KiranKeshavegowda]

Thanks, Terry.

i have raised a service request with NI. will keep you updated with the solution i get from NI. 

[Xingxing_HOU_WYK]

Same Error with sample form example, and I replaced another same module(PXIe-7821R), It fixed!
So, try another module if you have.

[KiranKeshavegowda]

Hi.

Thanks for the reply.. i had another 7820R module and see the same error. 

The Module seems to be good.. becuase it works when it is connected with different setup.

the problem seems to be with Host PC Bios /Drivers. Teh PXI chassis is connected to Host Machine/PC via MXI.