From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Multisim and Ultiboard

cancel
Showing results for 
Search instead for 
Did you mean: 

Can anyone help me solve this convergence issue for my op-amp circuit?

Solved!
Go to solution
0 Kudos
Message 1 of 8
(5,202 Views)
Solution
Accepted by topic author Hiesenberg1984

At a quick glance, it appears you have your power supplies reversed. VEE should be minus supply, VCC should be positive.

Message 2 of 8
(5,191 Views)

Can you quickly help me with this one also?

0 Kudos
Message 3 of 8
(5,154 Views)

I am not sure about what the issue could be but this post could be useful to resolve simulation erros:

 

http://digital.ni.com/public.nsf/allkb/A65253BD02F585CD86257A6B0049945D

Randy @Rscd27@
0 Kudos
Message 4 of 8
(5,102 Views)

If you go into the symbol properties, and turn on symbol pin names (see image). Then in schematic view the error becomes plainly obvious. The+ 20 and -20 are backwards (based on the voltages listed). I have not tested this, but I am sure that is the problem.

 

homewrk5A.PNG  homewrk5B.PNG

0 Kudos
Message 5 of 8
(5,099 Views)
0 Kudos
Message 6 of 8
(5,088 Views)

So do I need to repost in the other forum, or what? Or can the mods fix that? I would rather my time to answer the question not go to waste.

 

Thanks

0 Kudos
Message 7 of 8
(5,079 Views)

Is not necessary I did the comment to let him know that he should not duplicate forums! Leave your answer Here!

 

Warm Regards,

Randy

Applications Engineering

National Instruments

www.ni.com/support 

Randy @Rscd27@
0 Kudos
Message 8 of 8
(5,071 Views)