From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I found the error code, the data I'm attempt to write is to small or to large for the range. My range is 0 to 5.0V. The data buffer goes from 1.0 to 5.0. What's the problem?
The problem is not with the range, but mix up in the config vs the write commands -- not a very focused error-like windows