Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Need Info On PXI 6071E card

Hello,

I need to generate analog voltage from 0V to 2.5V with resolution step of

2mV. Can i achieve this by using PXI 6071E card..?. Since i have this card

with me already, i want to know whether i can make use of this. Can you

please help me out..?

Regards

Dayanand

0 Kudos
Message 1 of 2
(2,484 Views)
According to the manual, the two analog outputs are 12 bits (4096 steps) and can be programmed for -10 to +10, 0 to 10, -AOEXTRef to + AOEXTRef and 0 to + AOEXTRef.
 
If you program the 0 to 10V range, 10V/4096 steps = 2.44mV per step. So that's pretty close to your 2mV resolution.
 
I do not know about using AOEXTRef, it may give you finer resolution if you can apply a voltage less than 10V and still resolve it into 4096 steps (i.e. 5V/4096steps = 1.22mV resolution/step) Maybe someone else can cmine in on the use of the external reference. And then there is always the manualwink smiley
 
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
0 Kudos
Message 2 of 2
(2,479 Views)