Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

MAX not seeing PXIe-4300

Greetings,

The PXIe-4300 cards are not seen by MAX. After DAQmx 9.7.5 is repaired, the cards are then recognized and the tasks work fine. After restart the problem re-occurs until DAQmx is repaired again. No issues with other PXI/PXIe cards in the 1062Q Chassis. Any solutions?

 

Measurement & Automation Explorer 5.5
DAQmx 9.7.5

0 Kudos
Message 1 of 2
(2,145 Views)

Hello Frank_at_Cal-Matrix,

 

Has this setup worked correctly before? When did this start happening? Is there a specific reason you are using DAQmx 9.7.5 and not a newer release?

 

Aside from that, if you have a system restore point I would recommend trying that. I would also recommend sharing which controller you are using with your PXIe system.

 

All the best,

0 Kudos
Message 2 of 2
(2,116 Views)