Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Hardware Error 50152 PCIe Windows10 NIDAQ 19

Hi,

 

I have one program working fine for 2 or 3 months, and now I recieve the -50152 randomly.

 

I have reinstall the NIDAQ drivers.

I have change the PCIe slot.

 

Even I have purchase another DAQ, which has been working fine for more than one month, and now I have the same error message.

 

In order to run the program again I must reboot the computer but it doesn´t guarantee that the error will be gone.

 

senper_0-1695721470156.png

 

I would apreciatte any help as there is not much informatio about this error. If you need any extra information please feel free to ask.

 

Regards

 

0 Kudos
Message 1 of 8
(1,002 Views)

Try the steps in Error -50152: "A Hardware Failure Has Occurred"

-------------------------------------------------------
Control Lead | Intelline Inc
0 Kudos
Message 2 of 8
(978 Views)

Hi ZyOng,

 

Thank you for the help, I already followed these steps with the first DAQ.

 

Reset NI MAX Configuration -> It worked for a couple of days and then the error came back.

 

Didn´t install the BIOS Compatibility Software as I don´t use PXI. 

 

Change PCIe slot -> same error after a couple of reboots.

 

Verify other cards ...  -> Bought a new DAQ, it was working fine for some weeks until yesterday.

 

I am not usind any Thrunderbold MXI Expansion so I didn´t follow those steps.

 

I thought it was a DAQ problem but now I realize it is not, and now I don´t know what to do.

 

Regards

 

 

 

 

0 Kudos
Message 3 of 8
(969 Views)

What's the versions of Windows, NI-DAQmx driver and LabVIEW?

-------------------------------------------------------
Control Lead | Intelline Inc
0 Kudos
Message 4 of 8
(964 Views)

Windows 10

 

NIDAQ 19.1.0f2

 

LabVIEW 2012

0 Kudos
Message 5 of 8
(959 Views)

LabVIEW 2012 is not compatible with Win10. 

The first supported LabVIEW version in Win10 is 2015 SP1. NI Product Compatibility for Microsoft Windows 10

-------------------------------------------------------
Control Lead | Intelline Inc
Message 6 of 8
(947 Views)

Thank you for the informacion, I wasn´t aware of that. I have some old exes running under windows 10 that were developed in XP and I did suppose that it wasn´t a problem.

 

Good to know thank you

 

 

0 Kudos
Message 7 of 8
(943 Views)

Hello again,

 

It looks like there was some kind of incompatibility with an Yottamaster PCI-E to USB3.2 expansion card. One we removed the card the problem dissapeard.

 

Regards

0 Kudos
Message 8 of 8
(830 Views)