From Friday, January 17th 11 PM CDT (January 18th 5 AM UTC) through Saturday, January 18th 11:30 AM CDT (January 18th 5:30 PM UTC), ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Most Active Hardware Boards Multifunction DAQ Topic

Multifunction DAQ

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

DAQmx Base Task Config Utility shows no devices

DAQmx Base Task Config Utility shows no devices

‎06-30-2017 04:30 AM

Hi,  I want to use a NI-6010 board in a PowerPC Mac running MacOS 10.4.11 and have installed

various versions of NI-DAQmx Base. The DAQmx Base Task Config Utility shows no devices although Isdaq shows the board is present.  How can I configure the board?

Many thanks, Brian

 

0 Kudos
Message 1 of 2
(2,613 Views)
Reply

Re: DAQmx Base Task Config Utility shows no devices

‎07-03-2017 10:12 AM

Hi bjr1, 

 

It looks like there may not be an option that supports both your operating system and your hardware.

 

 

From NI-DAQ Driver Support: PCI/PXI Devices it says NI-DAQmx Base 3.4 - Mac OS X is the first DAQmx driver to support the 6010.


However, looking at the readme files it looks like NI-DAQmx Base 3.3 - Mac OS X was the last DAQmx driver to support Mac OS X 10.4 (Tiger) on Intel or PowerPC (10.4.8 or later). 

 

If you can upgrade to Mac OS X 10.5 (Leopard) on Intel then I'd recommend DAQmx Base 3.4.

 

Hope this helps,

Rebecca

0 Kudos
Message 2 of 2
(2,556 Views)
Reply