04-17-2019 04:45 AM
Hi everybody,
I downloaded the driver of my oscilloscope (Agilent DSO1024A) for LabView 2018 from this link:
and there's a VI that turns to another VI when I change from 'single' to 'multi' here
it's wierd because I just run the first example directly after downloading the driver but it lookd like this
so all VI's are working but this VI (and it's the most important one)
does this mean that there's a problem in the library or maybe did I do something wrong ?
if I forgot to procure other informations about the issue please just ask
Solved! Go to Solution.
04-17-2019 04:50 AM
Hi achouch,
there's a VI that turns to another VI when I change from 'single' to 'multi'
does this mean that there's a problem in the library or maybe did I do something wrong ?
This is a polymorphic VI and you can choose among several options/instances.
So it's your problem when you change the instance in this example VI!
04-17-2019 05:05 AM
no i didn't change anything the example lookd like this when I opened it
and i just meant that it's because the 'multi' version of the VI is not working correctly
04-17-2019 05:53 AM
Hi achouch,
no i didn't change anything the example lookd like this when I opened it
Maybe someone else changed the example VI and saved it (accidently)…
(I don't think they ship a non-working example VI.)
and i just meant that it's because the 'multi' version of the VI is not working correctly
That "multi" instance will work correctly on its own.
You ned to cleanup and debug that wiring in the example VI…
04-17-2019 07:43 AM
thank you so much for replying,
I repared the problem manually but I'm getting an error I created a new topic about it in thins link:
https://forums.ni.com/t5/LabVIEW/error-1074004013/m-p/3916303