From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-10-2009 08:26 AM
Suppose we take the red point on the polar grid. When i convert it to Re & Im parts i get a number in rectangular grid, but this point is not actually present in the rectangular grid shown on right. This polar point was found by interpolating some points. How can i find a point in rectangulr grid then?
thanks
03-10-2009 08:53 AM - edited 03-10-2009 08:54 AM
It is not clear to me what you mean by "How can i find a point in rectangulr grid then?". What is "find" in this context?
03-10-2009 09:18 AM - edited 03-10-2009 09:20 AM
Hello altenbach
I am having a 2D array , say Array 1, which is in the polar grid. I found this Array1 from another 2D array, ("Array2") by interpolation. Now I take some values from Array2 and need to find the corresponding values in the Array1. This is what i what.
I short i need to find the points in Array1 which i interpolated using the point i got by interpolation (Array2)
05-23-2013 06:54 AM
I need prgram Labview: convert Rectangular to polar.