LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

VIPM installation problem

Solved!
Go to solution

Good afternoon, everyone. My name is Leong, and I have the problem to install the VIPM after I download the VIPM from the website. I installed the NI labview 2009 run time software, the message display as the below:

 

 

Error 5 occurred at an unidentified location

 

Possible reason(s):

 

LabVIEW: File already open

 

 

May I know that what is the problem so I know how to solve it? Thank you for your kindness help.

0 Kudos
Message 1 of 6
(3,131 Views)

Is the error from VIPM installer, or from the LabVIEW Run-Time installer?

 

If from the VIPM installer, you may have more luck searching the VIPM forums: VIPM forum

 

Try reading this post from Jim Kring: How come I get error 5 during VIPM installation?

Thoric (CLA, CLED, CTD and LabVIEW Champion)


Message 2 of 6
(3,124 Views)

Dear Thoric. Thank you for your kindness to provide me the solution in order to overcome the problem I faced. I solved the problem according your solution given to me.

 

Sincerely yours,

Leong Yun Siong

0 Kudos
Message 3 of 6
(3,116 Views)
Solution
Accepted by topic author ArduinoProject

You're welcome.

Don't forget there are Kudos and Accepted Solution buttons you can select - these are most appreciated Smiley Happy

Thoric (CLA, CLED, CTD and LabVIEW Champion)


Message 4 of 6
(3,113 Views)

Leong, you should press the "Accept as Solution" button next to Thoric's reply. Also you should press the Kudos button. That means that you like his reply.

=====================
LabVIEW 2012


Message 5 of 6
(3,112 Views)

Thank you, Steve. I owe you one.

0 Kudos
Message 6 of 6
(3,088 Views)