LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Serial Communication with myRio

Hye.Im trying to connect GD02Rev2.0 (driver for the g15 cube servo) with myRio. I have to connect the Rx Tx and Control pin of the driver to the myRio to run the motor. It seems like i have to create serial communication in labview.Can anyone help me on this.thanks.The driver looks like below:

0 Kudos
Message 1 of 4
(3,121 Views)

Hi ravinath,

 

It seems like i have to create serial communication in labview.

Yes, you need to.

Keep in mind your motor driver works with (LV)TTL levels on the logic lines, so you CANNOT connect to a standard RS232 port! You need to use a level shifter - or GPIO lines from your myRIO…

Best regards,
GerdW


using LV2016/2019/2021 on Win10/11+cRIO, TestStand2016/2019
0 Kudos
Message 2 of 4
(3,090 Views)

thank you for your reply.so how to create the functional blocks in labview for the serial communication?any examples please

0 Kudos
Message 3 of 4
(3,067 Views)

Hi ravinath,

 

use the example VIs coming with LabVIEW!

(Maybe there is also a special example for the myRIO, can't check that as I don't have the myRIO package installed.)

 

As said before: you will need some additional hardware to communicate with your motor driver…

Best regards,
GerdW


using LV2016/2019/2021 on Win10/11+cRIO, TestStand2016/2019
0 Kudos
Message 4 of 4
(3,063 Views)