LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

NI-CRIO9049 and kollmorgen drive communication problems, LabVIEW Interactive Test Penal can not enable the motor axis, error code -77055

After adding a terminal device to a LabVIEW project and adding a Kollmorgen motor axis to the terminal device, error -77055 is reported when the motor is enabled using the interactive test penal.At the same time, an F125 error is displayed on the AKD drivee8be44d703699c6d8a7564e9563919a.png711858aeae62dac816ec9d716278d89.jpga508191e363f8ec04ceb5bacf57febc.png

0 Kudos
Message 1 of 2
(609 Views)

Hi Huahao,

 

Unfortunately NI SoftMotion is now discontinued by NI, so you probably won't get a response from NI.  My company has a replacement solution here: TENET EMotion.

 

我是台灣人,過去我在NI工作15年,我們公司針對NI SoftMotion開發了很好的替代方案。你可以加我的微信: sharkera. 

 

BR

John

Add motion to LabVIEW in 30min or less - TENET EMotion
Finding it hard to source NI hardware? Try NI Trading Post

0 Kudos
Message 2 of 2
(553 Views)