From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I am not sure if this is the correct forum, but it's worth a shot...
Does anyone know if there exists anywhere a Labview VI driver for either:
a) Lumonics HD-300 dye laser b) Spectra-Physics PDL-3 dye laser
Both VI's would essentially be stepper motor drivers. The Lumonics is run from a DIO port and the PDL-3 is currently run from a serial port, but could be easily configured to run on a DIO port as well. The ideal solution would be instrument-specific VI's but related VI's may work or could be quasi-easily modified for the intended purpose. Perhaps there exists a generic stepper motor driver that someone could point me toward? Any help (especially code) would be greatly appreciated.
Tha nks in advance for any help.
Michael Wojcik
Department of Chemistry University of Idaho Moscow ID 83844-2343 wojc9603@uidaho.edu
Sent via Deja.com http://www.deja.com/ Before you buy.
