LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

How does the NI USRP-2920 satisfy Nyquist?

Acording to http://www.ni.com/white-paper/13881/en/, "The bandwidth and sampling rate are related as an I/Q rate of 200 kS/s has a bandwidth of approximately 200 kHz."

 

In all of the examples included for the NI USRP-2920, the I/Q rate on both the RX and TX match. From my understanding to satisfy Nyquist, the sampling frequency should be greater than 2 * [carrier frequency + 1/2(bandwidth)]. I'm still learning and may have missed something, but here are the questions I have:

 

1) How does specifiying only the I/Q rate allow sucessful RX and TX? In what senario would you want different I/Q rates fro the TX and RX?

2) What defines the sampling frequency? Does LabVIEW automaticly pick a sampling frequency based on the supplied carrier frequency and I/Q rate?''

 

Any input would be greatly appreciated, thanks for reading

-Pat

0 Kudos
Message 1 of 1
(2,524 Views)