07-16-2018 03:37 AM
Hey,
I am trying to learn about data acquisition and I don't find the DAQ assistant block why is that?
I attached two pictures.
Thanks.
Solved! Go to Solution.
07-16-2018 03:40 AM - last edited on 12-19-2024 03:48 PM by Content Cleaner
Hi Matanlaza,
you installed "DAQmx Base", which includes only some basic BASE routines.
When you want to use higher level functions you need to install DAQmx (without "Base" in the name)…
Btw. don't use the DAQAssistent for more than just simple "quick&dirty test VIs"!
07-16-2018 04:49 AM
thanks for your respond,
but I still don't see it on LabVIEW.
In any case, I will search to download the software you saidץ
07-16-2018 05:44 AM - last edited on 12-19-2024 03:49 PM by Content Cleaner
Hi Matanlaza,
you didn't mention which DAQmx version you will need, so I just searched for "daqmx download" to find this link…
07-18-2018 10:53 AM
Thank you!
I did not mention which version because I do not know what I need. I want to acquire data from my spectrum and I will try with this option
07-18-2018 11:01 AM
Hi Matanlaza,
I want to acquire data from my spectrum and I will try with this option
You still don't mention which kind of spectrum analyzer you want to use - as has been requested several times before in your other thread…
(In case you are using a 3rd party device you will not gain anything from installing DAQmx - but who knows as you refuse to provide more information.)
07-18-2018 11:12 AM
Sorry, you're right I did not mention the model.
The spectrum model is KEYSIGHT N9010A.
I'm trying to learn how to acquire data from the spectrum.
07-18-2018 02:02 PM