From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-07-2006 03:25 PM
03-08-2006 12:11 PM - edited 03-08-2006 12:11 PM
Hi Sheetal,
You can change this easily from the Block Diagram. On the Block Diagram you'll see a Stacked Sequence structure with 2 cases, one to change the wave volume and one for the speaker volume. These cases access separate dwComponent Type enum constants. You can either select Line In from one of these enums or add a third case identical to the first two, except with Line In selected for the dwComponent Type as shown below:
Message Edited by Jarrod S. on 03-08-2006 12:11 PM
03-08-2006 12:59 PM
Thanks for your reply.
As I mentioned in my question I want to change Line In property of Recording Control NOT Line In property of Volume Control.
Please take a look at attached screen shot.
03-09-2006 04:05 PM