Cannot locate Network shared variables in PSP browsing

[svds]

Hi, 

I created network shared variables on one PC and deployed the library. Then on a separate PC (which is on the same network host), I created a new project and tired to bind new variables to these ones using aliasing. However when I tired to browse with PSP, I could locate the first PC but it did not show any network shared variables. Kindly suggest me what can I try to solve it.

Best Regards,

Shah

[David22JRA]

Hello svds

Have you tried to use the Distributed System Manager in order to see all the variables in the network?

http://www.ni.com/download/ni-distributed-system-manager-2015/5471/en/

Regards

[svds]

Hi,

I monitored them using distributed system manager, however, the variables created on computer show up under Network Items->Computer name. But they do not show up when I try to view them through other computer using Distributed system manager.

Regards,

Shah

[Michael_78]

Hi, you may need to configure your firewall on the machine hosting the variables.  see here: http://www.ni.com/white-paper/12402/en/  

It is worth disabling your firewall briefly, just to see if the firewall is the issue.

[svds]

Hi Michael,

Disabling the firewall worked with following observations:

1- I only need to disable firewall on the PC that publishes the variables. The one receiving it can have the firewall ON.

2- The method recommended here http://www.ni.com/white-paper/12402/en/  , did not work. I created the required file and changed the number of ports to search from 100 to 1000. The issue persists. 

I guess I need to look more into accessing labview through Firewall. Thanks a lot for your advice! 

Regards,

Shah

[Michael_78]

I looked back and found i emailed NI, here you go : Shared variables require port 2343 to be opened for UDP and TCP as can be found
here:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/psp_firewall/

I have asked NI to update the document.  And you are right, these settings need to be added to the machine serving the variables.

I hope that works for you.  Michael.

[svds]

Hi Michael,

Sorry for delayed response. It turned out that I ONLY had to put exceptions for tagsrv.exe and lkads.exe in my windows firewall. I did not had to change any TCP ports etc, I only had to enter new rules for these two files in the inbound rules of firewall. Thanks for your support. 

Regards,

Shah

[holly7787]

Same problem and this was helpful, solved my problem.

Thank you