07-08-2008 12:01 AM
But now the problem is few test cases should be tested before the phone is paired and few after the phone paired.
Pairing a phone needs a Bluetooth enabled phone and an user interaction to give the pin no (1234)
I want to automate it somehow by which the VI should take care of pairing the phone automatically..
In what way should i proceed to do this...
Anybody who experienced the problem previously please help me...
07-08-2008 01:11 AM
afaik, it´s possible to deactivate the connection check.
Hope it helps.
07-08-2008 01:59 AM
07-08-2008 02:03 AM
i mean that it should be possible to deactivate the check. It should be possible to connect to the phone without insert the pin.
07-08-2008 02:15 AM
07-08-2008 02:20 AM
ok, so now you think about using a robot which press the keys or a software for the phone which insert the pin?
07-08-2008 03:40 AM
You are right.
But is there any possibility to interface a bluetooth phone with labivew and control it thru labview.
Which should avoid this robot (a solenoid which presses the pins automatically but would be costlier)
Please suggest which approach should i go for.
Solenoid thru mechanical action is already there in my mind.
But the setup would be costly...
Got some info in this page.
07-09-2008 08:56 AM
09-29-2008 01:27 AM
I have similar application like suneel,blluetooth automation.
1) Develop a GUI(which supports BT playback) and use labview as a bluetooth device
My question is can labview act as a bluetooth source ? can it send some files? GUI also has authentication access for BT devices.
Thanks & Regards
10-05-2008 09:57 AM - edited 10-05-2008 09:59 AM
I ve forgot about this thread.Its been a long time i've looked into this.
Anyways as Briab said in previous post to achive this i am looking for the serial command interface thru AT command interface.
I am not yet clear where to start but digging into all the manualsof phones which support AT Commands.
From one of my colleagues i heard that Siemens support the AT commands.
So once if hardware is available to me i will put forth some more comments of my observations...
I may strat the work from trow...