LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Application is not able to keep up with the hardware acquisition Issue

Hi,

 

I am new to LabView Data Acquisition System, so please forgive me for asking the question below.

 

I am using USB-6212 and a Keyence IR temperature sensor to monitor our device's temperature over time continuously.

I want to run the temperature measurement system for at least 6 hours; however, the LabView software crashed 30 minutes later.

It shows an error message attached, and I believe it is due to not having enough memory space after it measured so much data.

(The Size 4 indicator shows the number of elements in an array)

kaho2315_1-1675812274420.png

 

kaho2315_0-1675812076022.png

 

I have read many articles about this issue, and some suggested using "Request Deallocation" to clear out some unused memory.

I'm unsure if "Request Deallocation" would work for my situation since I want the program to run continuously (nonstop) for a few hours until a certain condition has been met.

 

I would like to see if anyone has any suggestions for solving this problem.

 

Thank you very much; I really appreciate for your help

 

 

 

 

0 Kudos
Message 1 of 4
(1,153 Views)

Id recommend you to take a look at this link, and search for examples

already included in your LabVIEW Environment.

 

Inside the link, take a look at the NI-DAQmx Read section

Examples listed are also available in LabVIEW installation.

 

CLA, CTA
Message 2 of 4
(1,138 Views)

On top of what LFBaute has shared and you should avoid using DAQ Assistant VI, you can check out Understanding and Avoiding NI-DAQmx Overwrite and Overflow Errors to learn how to configure suitable timing parameters as well.

-------------------------------------------------------
Control Lead | Intelline Inc
Message 3 of 4
(1,097 Views)

Hi LFBaute and ZYOng,

 

Thank you for your suggestions!

I edited the program to use NI DAQmx and producer-consumer architecture.

Now I have tried to run the code for 2 hours so far, and it works great!

 

Thank you very much once again. I really appreciate it!

Message 4 of 4
(1,057 Views)