CLA, CTA & CLED.
Used LabVIEW Since:
I saw LabVIEW (4.1 I think) for the first time around '97-'98.
All sorts of applications, probably about 80% is on Real-Time and FPGA. Typical stuff is HIL simulators, big DAQ systems (multiple controllers, 1,000+ channels), and using TestStand outside prodution testing (as a general sequencer for software verification or simulation environment preparation for instance).
I grew up in the Aarhus area and hadn't much exposure to technology in my family really. Until 1997 I was sure I was going to be a jet fighter pilot - had all the papers ready, pre-med checks and all. I had done some programming at that time, and had become rather good at it, but I didn't know you could make a living of being a programmer. I hadn't ever met one that did, I think?
Then a buddy of mine began studying to Electrical Engineer, and he told me that was very cool. Engineer? I thought that was something about digging in mud and building bridges (see how enlightened I was?). Ok, I checked it out, and decided to give that a go. And lo and behold, EEs do programming as well as electronics. Ok, I might be decent at this anyway. I already liked math and physics, so that was shaped for me. While doing the EE I worked as trainee at Denmark's at that time largest NI integrator (DSE). I also did my final project at DSE, and then held a few jobs over the next years at different development houses - doing all sorts of stuff, military, bagage handling equipment, and wind turbine controllers. Check my LinkedIn profile if you wish to know more details.
In 2006 I started work at small NI integrator (CIM), which when I left it in 2012 had grown into the biggest NI Alliance Partner in Denmark, and a competitor in the Northern Region of Europe. With CIM I executed more than a 100 LabVIEW and TestStand projects, some small, but several of considerable size (5-6 developers and 4-5,000 man-hours). I was awarded for some of the achievements, and at CIM I met the NI certification program (didn't know it existed before that actually). In a year and a half I did the CLAD, the CLD, the CTD, the CLA, and then the CTA.
In 2012 I felt I couldn't grow more with CIM and had to do something else. Find a place that had the same quality standards as I have. I couldn't join JKI (I can't move to the States just now), so I had to start my own (no pun intended, there are several great LabVIEW places - most of them in the States though). That became GPower - the GPower brand actually existed before 2012, as I had previously released toolsets on the LV Tools Network under that brand. So here I am, hiring employees and growing the business.
We're in the process of starting an LVOOP user group here in Denmark. Since I've spent so much of my time working with NI Alliance Partners I wasn't allowed to spend time on user groups and other silly stuff like that. We should go consult some customers! That's not a GPower philosophy I might add.
A little bit of everything (NI Discussion Groups and Lava).