Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

VISA resource name problem with Hameg HMS1000

Solved!
Go to solution

Hello,

 

I have a HAMEG HMS1000 spectrum analyser and i want to communicate with it using NI VISA and SCPI commands.

 

First i created a driver for my device with the informations given here : http://www.hameg.com/0.563.0.html. my device showed in the device manager under  "NI-VISA USB Devices"

 

The problem is when i launch NI MAX i can see my device and communicate with it using "VISA TEST PANEL" but when i switch to labview, visa resource name doesn't show the name of my device.

 

did i do something wrong? please help

 

 

0 Kudos
Message 1 of 4
(4,676 Views)
Did you use the VISA Wizard to create a USB RAW interface? That is seldom a good idea. Are you sure you weren't supposed to create a virtual com port? Most instrument vendors define a USB connection as either USBTMC or a serial connection.

p.s. Your link is bad.
0 Kudos
Message 2 of 4
(4,666 Views)

well yes i used the NI VISA Driver wizard to create a RAW usb interface, if it isn't much of a good idea should i use the windows drivers given by the vendor ? thank you again

0 Kudos
Message 3 of 4
(4,661 Views)
Solution
Accepted by nowever111
You should always use the driver provided by the vendor.
0 Kudos
Message 4 of 4
(4,652 Views)