Labview 7 Express Alert 😞
Sorry, this all I have to work with and there is no budget at this time to upgrade.
Hello, I am in stage 1 (transferring data reliably to labview 24/7) of my little sideproject which is to display and log Lab Environmental Data 24/7 from our Fisher 02-403 Digital Barometer which has a serial port. It actually came with software but no one here seems to like using it so I'm trying to come up with something more intuitive. I can find no info at all concerning I/O with this device so I am reverse engineering. I am pretty sure you cannot write anything to this device only read.
I started by hooking up the device and looking at the interface with NI Measurement and Automation, and received the following string: P,43,1019,44,31,01,0023.0\r\n.
I then tried using the Labview 7 Express Instrument I/O Assistant, selected COMM 1, changed the timeout to 5000 (trial and error), added a Read and Parse step, ran it and received the following string: P,43,0999,44,41,01,0018.0,XX. After much guessing, I have determined that the values that I have bolded change with the environment and the other 3 are always the same 9no clue what they represent). The 1st bolded alphabetical represents weather trend S= sunny P= partly sunny C= cloudy etc., the 2nd value is the barometric pressure in hPa, the 3rd is % relative humidity, and the last is Temperature in Deg. C.
At first I tried just creating tokens for the data I want and running the I/O Assistant in a while loop, but often got error messages suggesting that I needed to define all the tokens in the string. I have done that and it worked, then I opened the front panel to access the underlying diagrams from which I came up with the attached VI. I have let this run for more than 24 hrs, no errors, looks good.
My question to this forum is, can I at this point simplify this VI by losing some of the parsing for the data that I don't need?
Please let me know if you cannot access this VI maybe I can do a screen capture or something.
Solved! Go to Solution.
Wow that was an understatement, much simpler! I am going through the tutorial now, any idea why the videos won't run? I have tried different computers on different networks and can't get the videos in the basic tutorial to work.
Getting back to my vi, I am thinking to use the 'Serial Read with Timeout' vi from the examples as a sub-vi to handle the acquisition of the data from the barometer, do you foresee any issues with this approach? Thanks for your help!
Serial Read with Timeout is an obsolete example if I remember correctly that used the old serial functions and not VISA. I could be wrong about that since that example no longer comes with LabVIEW. Look at the Basic Serial Write and Read.