From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Instrument Control (GPIB, Serial, VISA, IVI)

Showing results for 
Search instead for 
Did you mean: 

Fluke 8845A bench top meter driver

Is there a driver out for this product yet?
0 Kudos
Message 1 of 7

I did not see one yet on the NI driver site, but according to a Fluke Web page, the 8845 can emulate the Fluke45 and HP33401 meters with full command set compatibility.

If you already have the meter, you may want to download those 2 meter drivers and experiment with them.

You can also make your own driver, the command set shoul dbe in the programmer's manual

"It’s the questions that drive us.”
Message 2 of 7
That is a great suggestion.  We plan to have a driver to officially support these Fluke models Q1 of 2007.
0 Kudos
Message 3 of 7
Cool, thanks for the info!
0 Kudos
Message 4 of 7

Is the LabVIEW driver for the Fluke 8845A/8846A models available yet?


Jason said a few months ago it would be in Q1 '07 - it's early Q2 now. 🙂


Roger H.



0 Kudos
Message 5 of 7
Hi Roger H.,
We are working on the driver and the goal is to have a beta version available by the end of April.  The driver utilizes the LabVIEW project and therefore supports LabVIEW 8.0 and later.
0 Kudos
Message 6 of 7
0 Kudos
Message 7 of 7