Converting from Fieldpoint to CDAQ

[TomTh]

Hi,

I am replacing a Fieldpoint FP-AO-V10 with a CDAQ 9264. We are using  0 - 10 V analogue out, low current, low speed, i.e. under operator control.

Just wondering if anybody out there had tried to do this already and if there is anything unlikely or hidden that I need to be aware of ?

Thanks.

[YusufD_UK]

Hi Tom,

I can confirm that a FP-AO-V10 can be replaced with CDAQ 9264 and other c series DAQ devices.

As this sounds quite important I would recommend contacting your local NI sales branch for more specifics and expertise. Here is a link to contact them: http://www.ni.com/contact-us/en-gb.

Hope this helps.