FIRST Tech Challenge Discussions

cancel
Showing results for 
Search instead for 
Did you mean: 

Error 74 LabView

We are encountering error 74 when we try to run our program from the computer connected to the NXT. We have been trying to found out about error 74 without much luck.

While tethered, all the components in our robot work, but the schematic and the controller do not match.  Untethered, only the wheels function and we can't get the lift mechanism to work at all.  When we try to connect to the FIRST Tech Challenge field, when it goes into teleop mode, the computer says that it doesn't have a teleop program working.  Please help!!

0 Kudos
Message 1 of 2
(5,379 Views)

Hi DHSGatorzillasRobotics,

There seems to be some documentation of similar issues on other posts. Take a look at some of the solution links/troubleshooting steps posted:

https://decibel.ni.com/content/message/63491#63491

https://decibel.ni.com/content/message/64367#64367

Let us know if this isn't the problem you're referring to.

Regards,

Kristen M

Automated Test Product Marketing Engineer
National Instruments
0 Kudos
Message 2 of 2
(4,889 Views)