Benchtop Measurement and Test
Distributed Measurement and Control
Systems Engineering Software
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
I am trying to get a divide by 2 working in a gp Counter. Code is based on the PulseTrainConfigure function posted several years ago by Tom W in thread http://forums.ni.com/t5/Driver-Development-Kit-DDK/Pulses-generator-on-pci-6259-with-QNX6/m-p/795023....
The minimum value for both the G1_Load_A / G1_Load_B registers seems to be 1 and this produces a divide by 4. A 0 value seems to disable the counter.
Attached is a copy of my PulseTrainConfigure_G1 as it is being used.
Is there any way to get a divide by 2?
What do you need our team of experts to assist you with?
We'll be in touch soon!