6602 RLP manual errata for G1/G3 Interrupt Acknowledge Register

[pgruebele]

Hi,

In the latest 6602 register level programming manual (November 2002 edition), on page 3-31.  It states that bit 6 is Gi_TC_Error_Confirm but in the bit field on the same page it shows this as bit 2.

Which one or these is correct?

Thanks

Philip Gruebele

[Tom_W_[DE]]

Hi Philip-

The Gi_TC_Error_Confirm bits are bit 2 in the G1 and G3 interrupt acknowledge registers.  The Gi_TC_Error_Confirm bitfield is found at bit 6 for the G0 and G2 registers.  It looks like there may have been a copy/paste error when that manual was generated.  I'll file a request to update it.

Thanks-

Message Edited by Tom W [DE] on 07-28-2008 09:20 AM