Digital I/O

cancel
Showing results for 
Search instead for 
Did you mean: 

Driver

Solved!
Go to solution

I need some help, where I can find the driver for NI 9403 series C?

0 Kudos
Message 1 of 5
(2,802 Views)

What chassis are you putting that module in?  If a cDAQ, then you use DAQmx.  If using a cRIO, then you need to use LabVIEW RT and/or LabVIEW FPGA with the cRIO drivers.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
0 Kudos
Message 2 of 5
(2,796 Views)

It's a chasis cDAQ 9178 Im using DAQmx, but accidentaly I removed the driver, now I can't find it, ?do I need to reinstall DAQmx?

0 Kudos
Message 3 of 5
(2,785 Views)

That would be my first step.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
Message 4 of 5
(2,762 Views)
Solution
Accepted by jmarti79

Hello jmarti79,

 

If you uninstalled DAQmx you will need to reinstall it in order to see your chassis and module under NI MAX.

 

You can download DAQmx through ni.com/downloads. Select the appropiate DAQmx version according to your LabVIEW or IDE version.

 

Let us know if this helps!


Fernando Becerra | Field Applications Engineer | National Instruments | CLA | CTD
0 Kudos
Message 5 of 5
(2,744 Views)